Here's a new set
of resin exhausts for
the 1/48 Macchi C.205 from Ultracast.
These are a straight
forward swap for the kit parts. These exhausts have
the fine detail and will look quite sharp on your next Macchi C.205.
They are designed to fit the Hasegawa kit.
There are 2 resin pieces in each
set.....enough for one model. Clean up is very minimal and the exhausts come attached to the casting blocks with very easy to manage connection points and
removal is easily done with no loss of detail. The detail level and
casting quality is flawless. Do not remove the seam line as I suspect
these were present on the full sized aircraft....check your references.
|
Above
photo of exhaust installed in the Hasegawa Macchi C.205 fuselage. |
The exhausts are a
major focal point on all models and these will really improve the look of your
model. Most kit exhausts aren't hollowed out, but these resin ones
are. Some careful detail painting and a wash and dry brushing will
accentuate the hollow pipes of these exhausts. To order these go to the Ultracast
website or directly to this page. http://www.ultracast.ca/products/48/177/default.htm
I'd like to thank
Kevin at
Ultracast
for sending me these
review sample.
Steve
|