I
just happened to come across this product and its maker by pure luck at a local
contest and upon first glance, I just had to have them...I bought the last
set!!! I have purchased cast metal landing gear sets from two other companies
but these are far better in detail…”in my own opinion”.
What
do you get? 2
Main landing gear struts, 1
nose gear strut, 1
nose gear retraction strut, and the nose gear steering cylinders all packed in a
small zip-loc bag for only $20.00US. No
instructions are included because the set is straightforward…but you will need
to use the kit instructions to add the kit parts.
Click on
images below to see larger images
|
|
|
|
This
set is by far the best I’ve seen designed to replace the Trumpeter F-105 kits
main and nose gear kit parts. There
are two other 1:32nd products to date that are cast in white metal, however this
set is cast in brass and the detail and casting quality are matchless when
compared to the others…hands down!!! The
modeler will have to remove the excess casting lug on the nose gear steering
cylinders (use the kit part for reference).
Clean up of the very faint mold seams is a snap… you will spend more
time on the kit parts doing the same due to the filling of the ejector pin
marks. I spent about ten minutes on
my “brass” using 400 grit wet/dry sand paper followed up with “0000”
steal wool and they look great!!! A
coat of Mr. Surfacer 1000 and they are ready for paint; you will be motivated to
press on and clear the workbench for the big Trumpeter kit.
When set
beside the kit parts, this set is just as detailed…but now you have the added
confidence that the weight of the F-105 will be supported by these brass jewels,
your F-105 will not “shimmy and shake” The main landing gear struts have the
torque link scissors cast on and cut outs for mounting the kit parts (landing
light and retraction strut. The
nose gear also has cutouts to accept the kit parts also, there’s even molded
on hydraulic/electrical lines molded on. The
nose gear retraction strut has a very snug fit when fitted which gives way to
the quality of the casting. I
highly recommend this aftermarket set to modelers building the Trumpeter
F-105D/G kits.
Click on
images below to see larger images
|
|
|
|
Ernie
has other products all with the same quality brass casting. I picked up his 1:48
F-4 landing gear set and now plan to get his awesome F/A-18 wing fold hinge set
(review coming soon). For more
information on his detailed products you can contact him for his future
releases. Thank you, Ernie for
allowing me to do this review on your fine product.
Le Vander
Click on
images below to see larger images
|
|
|
|